Revised

Editor’s note
The following abstract describes a publication that is only available as a downloadable PDF.

See the Silage Cost Analyzer (XLSX) for related information.

Raymond Massey
Professor, Agricultural Business and Policy Extension

Joe Horner
State Specialist, Agricultural Business and Policy Extension

A corn harvester in a field.
Figure 1. Agricultural producers should consider the current price of corn and inputs for pricing corn silage.

Silage is the harvest of whole corn plants at 60 to 70 percent whole plant moisture. Optimal harvest occurs when kernels are at 1/2 milk line to black layer.

Corn silage can be made from corn planted for silage or from corn planted for harvest as a grain crop. Frequently corn harvested for silage was planted for harvest as a grain crop. Farmers have several reasons to reconsider their harvest method. They or a neighbor may have a need for silage that was not anticipated at planting time. Drought may have reduced grain yields substantially so the value of the crop is greater as silage than for grain.

Silage and other forage crops remove more phosphorus and potassium from the soil than grain crops. Removal of phosphorus and potassium can be an additional expense if the soils are low in those nutrients. But silage can also be used in intensive manure spreading areas to purposefully remove crop nutrients from the soil. In areas that have high concentrations of phosphorus and potassium and where runoff potential exists, planting silage can quickly remove excess nutrients.

Farmers have priced silage using the rule of thumb that silage value per ton is 8 to 10 times the price of a bushel of corn. A factor of 8 to 9 times is used to price silage in the field; the factor of 9 to 10 times is used for pricing it in storage. A higher factor is used for lower priced corn and a lower factor for higher priced corn. This rule of thumb needs to be reconsidered given current corn and input prices. Currently, silage priced in the field may be closer to 7 times the price of a bushel of corn.

In addition, the rule of thumb may err in valuing silage because it does not take into account the dry matter percent of the silage. Dry matter percentage has a large effect on the value of silage to the livestock producer considering the purchase.

This guide is intended to help farmers estimate the breakeven price needed to justify harvesting a corn crop as silage rather than for grain. The estimated breakeven price of the standing crop becomes the corn farmer’s lower boundary price for negotiations with a livestock producer wishing to purchase and harvest a field as silage. The value of silage delivered to storage accounts for harvest and transportation costs incurred by either the crop or livestock farmer.

The livestock farmer’s interest is in knowing the cost of silage (on a dry matter basis) delivered to the feed bunk, after accounting for storage losses and shrink. Livestock farmers compare silage’s delivered cost per ton against costs of other feedstuffs.

Important factors affecting the breakeven price of silage are the price of corn, the expected grain yield of the growing crop and who incurs the costs of harvest and transportation of the silage. A downloadable spreadsheet is available to customize a silage value estimation.

This guide focuses on the wet basis price of silage. Determining the breakeven price of silage on a wet basis - as it stands in the field - is most normal for grain farmers and for estimating handling and storage costs.

Livestock producers price feed and balance rations on a dry matter basis. This guide shows how to convert the wet basis value to a dry matter value.

Pricing silage in the field

The basic principle of pricing a crop harvested as silage rather than grain is to estimate the value of the grain in the field, and make additions and subtractions to the value depending on the impact of changing the harvest method. Negotiations between crop and livestock farmers can proceed with this breakeven price in mind.

Silage harvest requires specialized equipment. Because silage choppers and wagons are not found on many grain farms, livestock producers who purchase standing corn crops for making silage may harvest the crop themselves with their own equipment. In this situation, because the crop farmer does not incur a harvest cost, the breakeven price of the standing crop is reduced by the cost of grain harvest.

Silage also removes more biomass – removing more phosphorus and potassium from the soil. The value of the standing crop is increased by the value of nutrients removed by the whole plant versus just the grain.

Begin calculating the value of the standing grain by first estimating bushels of grain per acre. Yield per acre can be estimated from harvesting a sample area of the field. A few rows can be left throughout the field for later grain harvest to determine yield per acre. Alternatively, harvesting by hand the grain from 174 feet of corn planted in 30-inch rows gives an estimate of the grain yield of 1/100th of an acre. Multiple the grain yield from the sample by 100 to estimate the yield per acre.

If small plots are harvested by hand with no yield loss, a one to four percent allowance for harvest loss should be deducted from the calculated yield. Choose an estimate that fits your experience in harvest loss.

Table 1. Calculation of silage price for corn standing in field using estimated yield.

DescriptionExampleUnitsYour farm
A. Estimated yield1150.00Bushels per acre 
B. Harvest time price of #2 yellow corn6.25Dollars per bushel of corn 
C. Less: Combining/harvest cost20.25Dollars per bushel of corn 
D. Less: Drying0.20Dollars per bushel of corn 
E. Less: Hauling0.25Dollars per bushel of corn 
F. Add: Fertilizer removal value30.46Dollars per bushel of corn 
G. Breakeven corn grain price (B – C – D – E + F)6.01Dollars per bushel of corn 
H. Value of standing crop (A × G)901.50Dollars per acre 
I. Estimated silage yield, wet basis18.00Tons per acre 
J. Silage price standing in field, wet basis (H ÷ I)50.08Dollars per ton 
K. Dry matter in silage35.00Percent 
L. Silage price standing in field, dry matter basis [(J ÷ K) × 100]143.09Dollars per ton 
1. From harvest of test rows (or from harvest of plots minus 1 to 4 percent estimated harvest loss).
2. Divide custom charge per acre by expected yield to obtain a per bushel cost.
3. Value of phosphorus and potassium removed in forage portion of plant.

Table 1 presents a process for valuing a growing crop that may be harvested as silage. A breakeven price between harvesting corn for grain or silage is needed. Start by estimating the harvest time market price likely to be received if the corn is harvested as grain. Decrease this price by subtracting the costs such as combining, trucking and drying that will not be incurred by the crop farmer if the crop is harvested as silage by the livestock farmer. Convert any per acre costs, such as grain combining, to a per bushel basis. Increase the price by the cost of additional nutrients that will be extracted because harvesting as silage removes more biomass.

Multiply this breakeven corn grain price by the estimated yield to get a value per acre of the standing crop.

Two conversions of the value per acre may be important to the livestock producer. First, the value per ton of silage can be obtained by dividing the value per acre by the expected number of tons of silage to be harvested. Information from Table 2 can be used to estimate the tons of silage expected for various grain yields.

Table 2. Relationship between grain and silage yield.

Grain yield
(bushels/acre)
Silage yield
(wet tons/acre)
Silage yield
(dry tons/acre)
4093
101145
148207
184269
2073111
2204014
Source: Lauer and Undersander (2004).

The livestock producer may also benefit by knowing the value of the silage on a dry matter basis. To obtain a dry matter value, divide the wet basis price value by the percent dry matter in the silage. Silage moisture content can vary considerably and the variability can affect the dry matter value of silage.

Pricing silage delivered to storage

When estimating the breakeven price of chopped silage delivered to silage storage, costs of chopping and hauling must be added to the value of the standing crop. Relevant units change from bushels of grain to tons of silage per acre.

Custom rates for harvesting and delivering silage are typically charged on a wet basis. It is simplest to compute a wet basis price of silage delivered to the storage structure.

Table 3 presents steps needed to take the results of Table 1 and estimate the value of silage delivered to storage. Custom silage harvest and transportation are usually priced on wet basis dollars per ton. The costs of harvest and delivery vary substantially depending on hauling distance, type of equipment and volume of silage.

Table 3. Calculation of silage price delivered to storage.

DescriptionExampleUnitsYour farm
A. Price of silage in the field, wet basis (Table 1, row J)50.08Dollars per ton 
B. Add: Silage harvest charge, wet basis8.00Dollars per ton 
C. Add: Silage delivery and fill charge, wet basis4.50Dollars per ton 
D. Silage price delivered to storage, wet basis (A + B + C)62.58Dollars per ton 
E. Dry matter in silage35.00Percent 
F. Silage price delivered to storage, dry matter basis [(D ÷ E) × 100]178.80Dollars per ton 

Pricing silage delivered to feed bunk

Livestock farmers are interested in cost of silage as a feed delivered to their animals. To estimate the cost of silage delivered to the feed bunk, several additional costs need to be considered. The process is summarized in Table 4. All added costs are made on a wet basis because that is a more common way to estimate silage cost.

The variable costs associated with storage (e.g., silage bags, bale wrap or silage cover) are added to the price of silage initially delivered to storage. Cost of permanent storage is not added as it is already a sunk cost that does not change with the decision to buy additional silage.

The costs of dry matter loss and shrink during storage need to be considered. Table 5 contains research estimates of dry matter loss for various storage types. While permanent storage structure costs are not considered in Table 4 computations, it is obvious that different storage structures have varied storage losses and are an important decision for livestock producers wishing to feed silage to their animals.

Handling cost of removing silage from storage and delivering to the feed bunk needs to be added. Handling costs will vary with type of storage structure. Estimate only the additional costs of handling the silage relative to using other feedstuffs.

Livestock producers compare feedstuffs on a dry matter basis. Once a wet basis cost of procuring and using silage is estimated, convert it into a dry matter cost by dividing by the percent dry matter in the silage.

Table 4 begins with the estimated silage value from Table 3 and adjusts for storage losses and handling costs. Dry matter silage value is of most value at this step because the livestock producer needs to compare it to the cost of other feed stuffs available.

Table 4. Calculation of silage value delivered to the feed bunk.

DescriptionExampleUnitsYour farm
A. Price of silage delivered to storage, wet basis (Table 3, row D)62.58Dollars per ton 
B. Add: Annual supplies (bags, covers, etc.)1.00Dollars per ton 
C. Estimated losses in storage, wet basis (see Table 5)16.00Percent 
D. Feedable percentage (100 - C)84.00Percent 
E. Add: Cost of storage losses, wet basis {[A ÷ (D ÷ 100)] - A}11.92Dollars per ton 
F. Add: Cost of removing from storage and delivering to feed bunk, wet basis1.50Dollars per ton 
G. Silage price delivered to feed bunk, wet basis (A + B+ E + F)77.00Dollars per ton 
H. Dry matter in silage35.00Percent 
I. Silage price delivered to the feed bunk, dry matter basis [(G ÷ H) × 100]220.00Dollars per ton 

Table 5. Estimate of silage losses during filling, storage and feed out.

Silo typeMoisture (percent)Dry matter loss percentage
FillingSeepageGaseousTop surfaceFeed outTotal
Conventional tower502 to 40531 to 511 to 17
601 to 30631 to 511 to 17
651 to 30831 to 513 to 19
701 to 21841 to 515 to 20
801 to 27931 to 521 to 26
Gas-tight tower402 to 40400 to 36 to 13
502 to 30400 to 36 to 12
601 to 20500 to 36 to 11
700 to 11700 to 38 to 12
Silage bags60 to 701 to 20521 to 59 to 14
801 to 22621 to 512 to 17
Stack, covered604 to 70665 to 1521 to 34
703 to 60743 to 1017 to 27
803 to 65823 to 1021 to 31
Stack, no cover604 to 7012245 to 1545 to 58
703 to 6111193 to 1037 to 47
803 to 6710113 to 1034 to 44
Trench or bunker, covered603 to 60645 to 1518 to 31
702 to 51733 to 1016 to 23
802 to 54923 to 1020 to 30
Trench or bunker, no cover603 to 6010125 to 1530 to 43
702 to 51993 to 1024 to 34
802 to 561063 to 1027 to 37
Wrapped silage bales50 to 602 to 30661 to 515 to 20
60 to 701 to 20851 to 515 to 20
Source: Holmes and Muck (2000).

Drought-damaged corn

Drought-damaged silage results when the growth of most plants is stopped at an immature stage and grain yield is drastically reduced. Drought-damaged silage usually has 80 to 90 percent of the feed value of high-grain corn silage per unit of dry matter if the moisture content of the crop is 70 percent or less when harvested. If moisture content is much above 70 percent, silage tends to be unpalatable and have lower feed value.

When drought causes yield reduction of 20 to 40 percent below normal, the silage produced appears to be equal to much higher yielding corn, but tons per acre are reduced proportionally.

Drought stressed corn silage may contain aflatoxin or other mycotoxins that can become worse with improper moisture at ensilaging or lack of proper packing. Dairy producers need to avoid aflatoxin contaminated silage as aflatoxin detection in milk can lead to milk rejected by processors. Segregating suspect silage supplies for further quality control sampling before feeding is a good practice in drought years.

Silage value to the crop producer versus livestock feeder

This guide has looked at breakeven silage prices at three stages. The breakeven price of the standing crop is important information for the crop farmer choosing between harvesting as a grain crop or allowing a livestock producer to harvest as silage. The breakeven price of silage delivered to storage is important information for whoever incurs the costs of silage harvest and transportation to storage. Each of these estimates are probably best understood on a wet basis value.

The livestock farmer will be interested in the cost of silage delivered to livestock, which can be compared to other feedstuffs. Cost of silage delivered to livestock estimated in this guide does not value the silage on its nutrient content. It is simply an estimate of its cost relative to harvesting the crop as grain – an estimate of an opportunity before the livestock farmer. The feed value of silage would be established by comparing it to alternative feedstuffs and rations that provide similar nutrients.

This guide estimates the breakeven price of silage for a mid-season opportunity to change harvest to silage rather than for grain. Because this is a short-term decision, only additional and reduced costs associated with harvest as silage are important.

A crop farmer wanting to build a longer-term business as a corn silage supplier to a livestock farmer faces a different set of concerns. Selection of silage corn varieties, optimal harvest maturity and ownership of silage harvest equipment can add feed value to silage. Livestock farmers may be interested in contracting with crop farmers who will regularly supply them with silage.

For the livestock farmer, the fact that the silage decision under consideration in this guide is short-term means that the cost of owning silage storage is not a factor in estimating silage cost. Only the incremental costs of acquiring, storing and feeding silage are important at this time.

See MU Extension publication G664, Corn Silage Planning Budget, to estimate costs for growing corn silage.

Sources

  • Holmes, B.J. and R.E. Muck. 2000. Preventing Silage Storage Losses. University of Wisconsin.
  • Lauer, J. and D. Undersander. 2004. Pricing corn silage for sale. In Proceedings and Joint Meeting of the Professional Nutrient Applicators of Wisconsin, Wisconsin Custom Operators and Wisconsin Forage Council. Eau Claire, WI. p. 87–91