University of Missouri Extension

G2081, Revised February 2001

Mineral Supplements for Beef Cattle

Chad Hale and K.C. Olson
Department of Animal Sciences

Beef cattle require a number of dietary mineral elements for normal bodily maintenance, growth, and reproduction. Minerals that are required in relatively large amounts are called major or macro elements. Those needed in small amounts are classified as micro, minor, or trace minerals. These terms, however, have no relationship to the metabolic importance of a mineral in the diet. A trace mineral can be as essential to the health and performance of an animal as a major mineral. The major minerals include calcium, phosphorus, magnesium, potassium, sodium, chlorine and sulfur. Among those needed in trace amounts are iron, zinc, manganese, copper, iodine, cobalt and selenium.

Functions of minerals

Calcium
Calcium is used in the formation and maintenance of bones and teeth. It also functions in transmission of nerve impulses and contraction of muscle tissue. A dynamic system involving calcium, phosphorus and vitamin D exists to maintain a relatively stable concentration of calcium in the blood. Calcium and phosphorus are stored in bone and mobilized into the circulatory system when dietary intake of the two minerals is adequate. Blood calcium level is not a good indicator of a dietary calcium deficiency because blood calcium is reflective of both calcium intake and calcium mobilization from bone.

Because of its importance in bone structure, deficiency of calcium in young animals leads to skeletal deformities. In older animals, fragile bones can result from extended periods of dietary calcium deficiency. Critical times to ensure that diets contain adequate calcium are during pregnancy (for proper bone growth of the fetus) and during lactation (to prevent excessive calcium mobilization from the bones of the lactating cow). Excessive mobilization of calcium from the skeletal system of the lactating cow can lead to milk fever, also known as parturient paresis or hypocalcemia. Symptoms include muscle stiffness and tremors, extreme weakness, and loss of consciousness. A common method of minimizing the risk of milk fever is to reduce calcium intake by cows for two weeks before calving. This ensures that the calcium mobilization system is functioning properly before lactation. After calving, dietary calcium is increased to meet the requirement of the lactating cow.

Calcium requirements change depending on animal age and production status. Nonlactating, pregnant cows require calcium at a level of 0.18 percent of total dry matter intake, while the requirement for lactating cows is 0.27 percent of total dry matter intake. Growing and finishing cattle require 0.31 percent calcium for optimal growth. The maximum tolerable level of calcium is not known.

Phosphorus
Phosphorus works in conjunction with calcium in the formation of bone. In addition, phosphorus is a component of deoxyribonucleic acid (DNA), the molecules that make up chromosomes and control genetic inheritance. Phosphorus is also involved in the chemical reactions of energy metabolism. Phosphorus-containing compounds like adenosine triphosphate and creatine monophosphate are the body's major storage depots of readily available energy. Worldwide, phosphorus deficiency is reported to be the most prevalent mineral insufficiency in grazing livestock. Deficiency of phosphorus results in decreased animal performance, including reduced weight gains, poor reproductive efficiency, and low milk production.

Because of their mutual role in bone metabolism, calcium supplementation and phosphorus supplementation are usually considered simultaneously. The recommended calcium-to-phosphorus ratio in ruminant diets is 2:1 to 1.2:1. Significant deviation from this ratio can result in abnormal bone growth and a condition known as water-belly. Water-belly occurs when calcium-containing concretions known as urinary calculi are formed in the kidneys. These calculi can block normal urine excretion and cause death in steers when left untreated. Heifers are usually not affected by the water-belly disorder.

Magnesium
Magnesium is an activator of many metabolic enzymes. These enzymes control reactions that range from the breakdown of glucose for energy to the replication of DNA, which is necessary for cell division. The most common problem associated with magnesium deficiency is a condition known as grass tetany. Observed most frequently in the early spring, grass tetany results from the consumption of lush forage, which has low levels of magnesium. The apparent depression in magnesium levels results from the high water content of rapidly growing plants. Symptoms include frequent urination, erratic behavior and convulsions. If left untreated, death can occur within several hours. Grass tetany is a major problem in some areas of Missouri and supplementation with magnesium can alleviate the problem. Cattle need about 0.04 to 0.1 percent magnesium in the dry matter of their ration. In areas where grass tetany is prevalent, higher levels of magnesium (up to 0.25 percent of dry matter intake) have been found beneficial to prevent grass tetany.

Magnesium oxide is the most common form of supplemental magnesium used to prevent grass tetany; however, it is characterized by bitter taste. Livestock are often unwilling to consume it at recommended levels, making free-choice supplementation of magnesium oxide to grazing cattle problematic. An uncomplicated method of supplementing magnesium oxide to cattle grazing grass tetany-provocative pastures is to mix it with a grain or oilseed supplement. Researchers in Virginia found that free-choice magnesium oxide consumption by grazing cattle was adequate when it was mixed in a 1:1:1 ratio with trace mineralized salt and one of the following: corn, alfalfa meal, dry cane molasses, or cottonseed meal.

Although magnesium supplementation has long been an effective means to combat grass tetany, recent research indicates that other factors may be involved. The occurrence of grass tetany is more frequent in fertilized pastures than unfertilized pastures. In addition, the occurrence of grass tetany will usually be higher after five to 10 days of cold weather. Forages that are prone to causing grass tetany are deficient in magnesium and sodium and have an excess of potassium. Sodium is involved in transporting magnesium into cells, so it is critical to maintain adequate sodium to facilitate proper magnesium utilization. Excess potassium consumption interferes with magnesium absorption from the gut, thus exacerbating the condition of low dietary magnesium. In areas where grass tetany is prevalent, it is critical to consider not only dietary magnesium intake but also dietary levels of sodium and potassium.

Sodium and chlorine
The requirement for sodium and chlorine is commonly expressed as a salt requirement. Both sodium and chlorine function to maintain the volume, pH and osmolarity of body fluids. Sodium is involved in muscle and nerve function. Chlorine is essential for hydrochloric acid production in the abomasum and for carbon dioxide transport. The maximum advisable level for sodium in the diet is 0.08 percent of the dry matter for dry cows and 0.1 percent for lactating cows. The requirement for chlorine is unknown. To date, deficiencies of chlorine have not been demonstrated in beef cattle.

Salt is often fed to cattle free-choice (i.e., cattle are allowed to select a dietary component of their own volition). Cattle will usually consume more salt than needed when it is fed free-choice. Cattle also consume more salt than needed if it is offered in loose, granular form. Cattle often eat 1-1/2 to 3 pounds of salt per month (3/4 to 1-1/3 ounces per day) when given free-choice access to loose salt. Roughly half that amount is consumed when salt is offered free-choice in block form.

Additionally, cattle eat more salt with high-roughage than with high-concentrate rations, with silage or pasture than with dry feeds, and with succulent grass than with mature grass. Cattle deficient in salt often eat dirt, manure, and urine in an attempt to satisfy their appetite for salt. This condition, known as pica, can be easily corrected with salt supplementation.

Potassium
Potassium is ubiquitous in the body of mammals because it is required in large amounts by most organ systems for normal functioning. Thus, a deficiency of potassium results in nonspecific symptoms such as poor appetite, followed by thinness, reduced performance, and stiffness, especially in the joints of the front legs. Potassium levels of 0.6 to 0.7 percent of ration dry matter are necessary to promote optimal performance by growing and finishing cattle. There is no evidence that potassium is needed in feedlot rations that contain sizable amounts of silage or another roughage. Additionally, rations containing molasses and alfalfa meal are not likely to be deficient in potassium. Grain often has less than 0.5 percent potassium; therefore, potassium supplementation may become critical in certain high-concentrate rations.

MU studies have shown that potassium will leach from fescue pasture forage during winter to levels as low as 0.3 percent of the dry matter. Potassium supplementation may be beneficial for cattle grazing these pastures from January through March. In contrast, lush forages like tall fescue pastures in early spring, often have extremely high levels of potassium. High levels of potassium interfere with magnesium utilization. This has the effect of exacerbating the already-low magnesium content of the lush forage and increasing the risk of grass tetany.

Sulfur
Sulfur is present in protein, certain vitamins (thiamin and biotin), enzymes and other compounds. Diets for growing and finishing cattle should be formulated to contain 0.15 percent sulfur on a dry matter basis. Substituting urea and other nonprotein nitrogen compounds for natural proteins in the diet lowers the sulfur content of a ration. Adding one part inorganic sulfur for each 15 parts of nonprotein nitrogen used in the ration is necessary to restore dietary sulfur levels to normal. Certain ruminal bacteria use inorganic sulfur to make sulfur-containing amino acids and other organic sulfur compounds. Dietary levels of sulfur that are above 0.4 percent of the dry matter are considered potentially toxic. Excessive sulfur interferes with the metabolism of selenium, copper, molybdenum and thiamin. Sulfur deficiency symptoms include decreased feed intake, unthrifty appearance, dullness of the hair coat and hair loss.

Moderate to high dietary sulfur intake can cause a condition known as polioencephalomalacia in ruminants. Aimless wandering, blindness, muscle tremors and convulsions characterize polioencephalomalacia. Young cattle (6 to 18 months old) are especially vulnerable to this disease. Growing and finishing diets that are high in sulfur (more than 0.4 percent of dry matter intake) and low in fiber can induce polioencephalomalacia. Feeds that are high in sulfur include water, molasses, beet pulp, cruciferous plants, and corn-distilling byproducts such as corn gluten feed. Prevention of polioencephalomalacia requires that both feed and water be tested for total sulfur content.

Cobalt
Cobalt is required for synthesis of vitamin B12 by ruminal bacteria. Since vitamin B12 synthesis occurs in the rumen, cobalt must be consumed in the diet. Injections of cobalt are not an effective means to correct deficiency. The daily cobalt requirement for beef cattle is 0.1 ppm of the total diet dry matter. Deficiency symptoms for cobalt include loss of appetite in the early stages of deficiency, followed by muscle wasting and anemia, as the deficiency becomes more severe. Vitamin B12 levels in the liver are a useful indicator of cobalt status. Levels of at least 0.19 ppm are considered adequate, while lower levels indicate a cobalt deficiency.

Cobalt supplementation is advisable for beef cows wintered on low-quality roughages of all types. In fact, most tall fescue hay samples collected in Missouri are marginal or deficient in cobalt. Adding 1 ounce of cobalt chloride or cobalt sulfate to each ton of free-choice mineral mixture is recommended for beef cows.

Copper
Copper deficiencies are fairly common among cattle that consume Missouri forages as a major portion of their diet. Deficiency symptoms include unthriftiness, bleaching of the hair coat, and anemia. Copper levels of 10 ppm are considered adequate for beef cattle. In regions where the vegetation supplies less than 5 ppm of copper, adult beef animals occasionally suffer from falling disease, a condition resulting in sudden death due to acute heart failure and anemia. If a copper deficiency is suspected, it may be advisable to have the diet analyzed for sulfur, molybdenum and iron content in addition to copper. These minerals are known to interfere with copper absorption, thus increasing the copper requirement. High levels of inorganic sulfur and molybdenum in the diet can increase the copper requirement by two- or threefold. Calves fed exclusive milk diets for long periods may develop copper deficiencies, but calves raised in a pasture setting rarely exhibit deficiency symptoms.

Copper toxicity in beef cattle has occurred when diets contained as little as 115 ppm copper in the total ration; however, large amounts of copper must accumulate in the liver before toxicity is observed. Just as levels of molybdenum, iron and sulfur influence the copper requirement, they also influence the level of copper needed to elicit toxicity symptoms. Copper toxicity symptoms include hemolysis (breakdown of red blood cells), hemoglobinurea (hemoglobin in the urine) and jaundice. Death may result after extended periods of toxicity.

Fluoride
A specific requirement for fluoride has not been demonstrated in beef cattle. Rather, toxicity is the major concern with fluoride in beef rations. Rock phosphate that has not been defluorinated often contains 3.5 to 4.0 percent fluoride. If untreated rock phosphate is used as a dietary phosphorus supplement, toxicity can occur when the rock phosphate is fed at 1 percent of the diet. Fluoride accumulates in the body and its harmful effects may not be noticed until a metabolic crisis is reached. Toxic levels in the diet cause abnormal bone structure and softening and irregular wear of the teeth. Safe levels of fluoride in the diet dry matter for finishing cattle are no more than 100 ppm (0.01 percent) and not more than 40 ppm (0.004 percent) for animals to be kept in the breeding herd.

Iodine
Beef producers in the northern United States, particularly the Great Lakes region, regularly encounter iodine deficiency. Iodine is essential for production of thyroxin, a hormone that regulates metabolic rate. A deficiency in iodine causes a condition called goiter, which is characterized by an enlarged thyroid gland. Other deficiency symptoms include weak or hairless calves, reduced reproductive performance and retained placentas.

The requirement for iodine is 0.5 ppm of the total diet dry matter. Beef rations that are high in nitrates interfere with the uptake of iodine by the thyroid gland. Supplementation with iodized salt is recommended for cattle consuming high-nitrate feeds and for pregnant cows. Adequate iodine is extremely important in pregnant cow diets to ensure normal development of the calf. Calves born to severely deficient cows may be weak, blind, hairless or stillborn. Calves born to cows that are even slightly deficient may have goiter. In most instances, iodized salt is an adequate iodine supplement for beef cattle.

Iron
Iron functions in oxidative enzyme systems involved in energy metabolism. It also enables the hemoglobin in red blood cells to carry oxygen to the tissues of the body. The iron requirement for beef cattle is 50 ppm. Milk is low in iron, so young animals are likely to have "nutritional anemia" from a deficiency of iron caused by an exclusive milk diet; however, iron deficiency is rarely seen in calves raised in a pasture setting. Other iron deficiency symptoms include reduced feed intake and pale mucus membranes. A deficiency of iron is not likely to occur with adult cattle in Missouri that have been provided with reasonable parasite control. Under extremely high densities of external parasites, enough blood loss can occur to cause symptoms of anemia.

Manganese
Manganese functions as a part of numerous enzyme systems. Growing cattle require 20 ppm in the diet while breeding cattle require 40 ppm. High levels of dietary calcium and phosphorus may interfere with manganese metabolism, causing the dietary requirement for manganese to increase. A deficiency of manganese in beef cattle under natural conditions has been reported in only a few areas of the northwestern United States. Deficiency symptoms include reduced fertility in cows and crooked calf syndrome in young calves. Crooked calf syndrome is typified by weak legs and swollen joints in newborn calves.

Selenium
States east and northeast of Missouri (i.e., Illinois, Michigan, Ohio, and Indiana) produce feed grains and forages that are deficient in selenium (less than 0.1 ppm selenium). Generally, cattle feeds grown on sandy or acidic soils in other areas may also be deficient in selenium. Some Missouri soils fall into these categories. Occasional soil tests are necessary to determine if selenium deficiency may be a problem on a particular farm.

One of the most familiar symptoms of selenium deficiency is white muscle disease, a muscular degeneration in young calves. A few cases of this condition have been diagnosed in Missouri. A deficiency of selenium in gestating cows may cause retained placentas. Selenium toxicity, which occurs primarily in cattle and sheep grazing on alkali soils in the West, is called "blind staggers," alkali disease, or forage poisoning.

Selenium and vitamin E have similar metabolic activities. As a result, they tend to spare one another so that the selenium requirement of beef cattle depends on the amount of vitamin E in the diet. The selenium requirement of beef cattle is about 0.1 ppm of the diet dry matter, while the toxic level is about 50 times higher (5 ppm). High levels of fat in the diet may increase the requirement for selenium.

Selenium has been approved for use in total mixed rations for beef cattle at a level not to exceed 0.1 ppm of the dry matter. In a limit-fed supplement, FDA regulations allow selenium to be used at a level not to exceed an intake of 1 milligram (mg) per head per day. Up to 20 ppm selenium may be used in a salt-mineral mixture for free-choice feeding to cattle, but care must be taken to ensure that the total daily intake of selenium does not exceed allowed levels.

Zinc
Enzymes for protein and carbohydrate metabolism require zinc. The immune system also requires zinc to function properly. The maintenance requirement for zinc is generally thought to be 30 ppm, but the requirements for lactation and reproduction are not known. Deficiency symptoms of zinc include general unthriftiness, excessive salivation, scabby skin on the legs, slow wound healing, loss of hair, and dermatitis over the entire body. A deficiency of zinc is not likely to occur under normal feeding conditions; however, high calcium in the diet has been shown to interfere with zinc absorption in the gut. Zinc supplementation of beef cattle diets has not been proven to have a consistently beneficial effect.

Animal requirements

Cattle require different levels of minerals, depending on age, size, sex, physiological state, and level of performance. Some examples of nutrient requirements for cattle at different stages of maturity and production are provided in Table 1. The maximum level of each mineral that can be safely tolerated by beef cattle is also included for reference purposes. A compilation of supplements that may be used to meet animal requirements for specific mineral nutrients is provided in Table 2. Both the amount of mineral in the supplement and the bioavailability (i.e., the amount of mineral in the supplement that is able to be absorbed and subsequently used by the animal) are important factors in determining which mineral supplement is most cost effective. The first supplement under each mineral heading is the standard to which all of the other supplements were compared to determine the relative bioavailability value (RV). For instance, calcium carbonate is the standard by which all calcium supplements are compared. It is assigned an RV of 100 percent. Calcium from bone meal is 10 percent more bioavailable than calcium carbonate, resulting in an RV of 110 percent. Some commonly used supplements contain more than one mineral (Table 3). If diets are deficient in more than one mineral, it may be cheaper to use a supplement that supplies more than one required mineral than to purchase a separate supplement for each mineral.

Table 1
Mineral requirements and maximum tolerable levels for beef cattle

Mineral units Growing and finishing cattle Gestating and dry cows Lactating cows Maximum tolerable level
Calcium, percent 0.31 0.18 0.27  
Chlorine, percent        
Chromium, ppm       1000.00
Cobalt, ppm 0.10 0.10 0.10 10.00
Copper, ppm 10.00 10.00 10.00 100.00
Iodine, ppm 0.50 0.50 0.50 50.00
Iron, ppm 50.00 50.00 50.00 1000.00
Magnesium, ppm 0.10 0.12 0.20 0.40
Manganese, percent 20.00 40.00 40.00 1000.00
Molybdenum, ppm       5.00
Nickel, ppm       50.00
Phosphorus, percent 0.27 0.18 0.27  
Potassium, percent 0.60 0.60 0.70 3.00
Selenium, ppm 0.10 0.10 0.10 2.00
Sodium, percent 0.07 0.07 0.10  
Sulfur, percent 0.15 0.15 0.15 0.40
Zinc, ppm 30.00 30.00 30.00 500.00
Adapted from National Research Council. 1996. Nutrient Requirements of Beef Cattle, seventh revised edition. Washington, D.C.: National Academy Press.

Table 2
Source, empirical formulas, mineral concentrations and relative bioavailabilities of common mineral sources.

Mineral Supplement Empirical formula Mineral concentration (percent) Relative bioavailability (RV) Mineral availability (percent of content)
Calcium Calcium carbonate CaCO3 38 100.00 38.00
Bone meal variable 24 110.00 26.40
Calcium chloride (dihydrate) CaCl2(H2O) 31 125.00 38.75
Dicalcium phosphate Ca2(PO4) 20 110.00 22.00
Limestone   36 90.00 32.40
Monocalcium phosphate Ca(PO4) 17 130.00 22.10
Cobalt Cobaltous sulfate CoSO4(H2O)7 21 100.00 21.00
Cobaltic oxide Co3O4 73 20.00 14.60
Cobaltous carbonate CoCO3 47 110.00 51.70
Cobaltous oxide CoO 70 55.00 38.50
Copper Cupric sulfate CuSO4(H2O)5 25 100.00 25.00
Copper EDTA variable variable 95.00 variable
Copper lysine variable variable 100.00 variable
Cupric chloride (tribasic) Cu2(OH)3 Cl 58 115.00 66.70
Cupric oxide CuO 75 15.00 11.25
Cupric sulfide CuS 66 25.00 16.50
Cuprous acetate CuC2O2H3 51 100.00 51.00
Iodine Potassium iodide KI 69 100.00 69.00
Sodium iodide NaI 84 100.00 84.00
Calcium iodate Ca(IO)3 64 95.00 60.80
Diiodosalicyclic acid C7H4I2O3 65 15.00 9.75
Ethylenediamine dihydriodine C2H8N2(HI)2 80 105.00 84.00
Pentacalcium orthoperiodate Ca5(IO6)2 39 100.00 39.00
Iron Ferrous sulfate heptahydrate FeSO4(H2O)7 20 100.00 20.00
Ferric citrate variable variable 110.00 variable
Ferric EDTA variable variable 95.00 variable
Ferric phytate variable variable 45.00 variable
Ferrous carbonate FeCO3 38 10.00 3.80
Magnesium Magnesium sulfate MgSO4 20 100.00 20.00
Magnesium acetate MgC2O2H4 29 110.00 31.90
Magnesium basic carbonate MgCO3 31 100.00 31.00
Magnesium oxide MgO 55 100.00 55.00
Manganese Manganese sulfate MnSO4(H2O) 30 100.00 30.00
Manganese carbonate MnCO3 46 30.00 13.80
Manganese dioxide MnO2 63 35.00 22.05
Manganese methionine variable variable 125.00 variable
Manganese monoxide MnO 60 60.00 36.00
Phosphorus Sodium phosphate NaPO4 variable    
Bone meal variable 21 100.00 21.00
Defluorinated phosphate variable 12 80.00 9.60
Dicalcium phosphate CaHPO4 18 85.00 15.30
Selenium Sodium selenite Na2SeO3 45 100.00 45.00
Cobalt selenite variable variable 105.00 0.00
Selenomethionine variable variable 245.00 0.00
Selenoyeast variable variable 290.00 0.00
Sodium Sodium chloride NaCl 40 100.00 40.00
Sodium bicarbonate Na(CO3)2 27 95.00 25.65
Zinc Zinc sulfate ZnSO4(H2O) 36 100.00 36.00
Zinc carbonate ZnCO3 56 60.00 33.60
Zinc oxide ZnO 72 100.00 72.00
Adapted from: Ammerman, C.B., D.H. Baker, and A.J. Lewis. 1995. Bioavailability of Nutrients for Animals. New York: Academic Press. and National Research Council. 1998. Nutrient Requirements of Swine, 10th revised edition. Washington, D.C.: National Academy Press.

Table 3
Composition of mineral supplements.

Supplement Calcium percent Phosphorus percent Sodium percent Potassium percent Magnesium percent Manganese ppm Iron ppm Copper ppm Zinc ppm Selenium ppm
Bone meal 24.00 12.00 0.46   0.64 30.40 840.00 16.30 424.00  
Calcium carbonate 38.00   0.06 0.06 0.50 279.00 336.00 24.00   0.07
Curacao phosphate 36.00 14.00                
Diamonium phosphate 0.50 20.00 0.04   0.45 500.00 15000.00 80.00 300.00  
Defluorinated phosphate 33.00 18.00 4.50 0.09   220.00 9200.00 22.00 44.00 0.60
Dicalcium phosphate 20.00 18.50 0.08 0.07 0.60 300.00 10000.00 80.00 220.00 0.60
Mono-dicalcium phosphate 16.00 21.00 0.05 0.06 0.50 220.00 7000.00 70.00 210.00 0.60
Mono-ammonium phosphate 0.50 24.00 0.06   0.45 500.00 12000.00 80.00 300.00  
Sodium phosphate   21.80 32.30              
Sodium tripolyphosphate   25.00 31.00       42.00      
Phosphoric acid (75 percent)   23.80         5.00      

Many common feedstuffs included in the diet of beef cattle can contribute a significant portion of the animal's mineral requirements. The mineral composition of feeds that are commonly used in Missouri is show in Table 4.

Table 4
Mineral composition of feedstuffs common to Missouri.

Feedstuff Calcium percent Phosphorus percent Sodium percent Potassium percent Magnesium percent Manganese ppm Iron ppm Copper ppm Zinc ppm Selenium ppm
Fescue hay 0.41 0.30 0.02 1.96 0.16 97.00 132.00 22.00 35.00  
Alfalfa hay 1.40 0.28 0.05 2.43 0.28 30.30 198.00 7.30 18.80 0.41
Corn silage 0.25 0.22 0.01 1.14 0.18 23.50 131.00 4.18 17.70 0.53
Soybean meal 0.25 0.60 0.04 1.97 0.27 27.50 120.00 28.00 60.00 0.1
Corn gluten feed 0.07 0.95 0.26 1.40 0.40 22.10 226.00 6.98 73.30 1.8
Soybean hulls 0.53 0.18 0.03 129.00 0.22 10.00 409.00 17.80 48.00 0.14
Corn 0.30 0.32 0.01 0.44 0.12 7.89 54.50 2.51 24.20 0.6
Barley 0.05 0.35 0.01 0.57 0.12 18.30 59.50 5.30 13.00 1.16
Tables 3 and 4 are adapted from National Research Council. 1996. Nutrient Requirements of Beef Cattle, seventh revised edition. Washington, D.C.: National Academy Press.

Special considerations

Forage analysis and mineral supplements

The mineral values listed in the Table 4 are intended to serve as guidelines only. In general, forages are good sources of calcium, while grains and animal products are fair to good sources of phosphorus. When planning a mineral supplementation program for forage-fed cattle, it is important to realize that bioavailability of minerals from forage may be low. As a rule of thumb, mineral values in forages should be discounted by 50 percent to account for potentially low bioavailability. A forage-testing program is necessary for reasonably accurate evaluation of the mineral composition of forage-based cattle diets. Mineral content in forage often mirrors the concentration of minerals in the soil. Pasture fertilization schemes and stage of maturity of the forage affect mineral content and mineral bioavailability.

Usually, a commercial mineral supplement will meet the needs of most classes of cattle. Commercially available mineral supplements contain predetermined amounts of each mineral. They are produced in mass quantities to ensure a consistent and relatively inexpensive product. The many commercially available products give beef producers a wide range of supplements from which to choose. Suitability of these products to a specific operation will be determined by forage mineral profiles, concentrates feeds that are typically offered, and soil type. The amount of each mineral provided by commercially produced mineral supplements must, by law, be printed on the label, which provides beef producers with the information they need to select a supplement that best suits a particular situation.

In some instances, a commercial supplement may not supply an appropriate amount of certain minerals. Custom-mixes can be used to tailor a mineral supplement to a specific farming or ranching enterprise. In this circumstance, the supplier of the supplement will work with the producer to provide the proper level of minerals based on analysis of the animal's diet. Using a custom mix ensures that all nutrients are fed at levels needed to promote optimum performance, while none are fed in excessive amounts. Custom mineral mixes can be more expensive than commercial mixes, but this is not always the case.

Supplementation strategies

Several methods are commonly used to supplement rations for beef cattle with minerals:

Mineral interactions

Proper balance between minerals is critical. Perhaps the best illustration of this principle is the relationship between calcium and phosphorus. Calcium-to-phosphorus ratios of 2:1 to 1.2:1 are recommended for beef cattle diets. Variation from the recommended ratios, especially providing more phosphorus than calcium in the diet, can lead to urinary calculi, or water-belly, in steer calves. While striving to maintain the proper balance between dietary calcium and phosphorus, care must be taken not to get the absolute levels of these minerals too high in the diet. High levels of calcium and phosphorus increase the magnesium, manganese, iron, iodine, sulfur and zinc requirements. Beef producers should also be aware that high levels of magnesium, iron, or aluminum might interfere with the uptake of calcium and phosphorus from the small intestine.

Another important example of maintaining adequate balance between minerals is the relationship between copper, molybdenum, iron and sulfur. These minerals form complexes with one another in the body, reducing the amount of copper absorbed by the animal. Addition of molybdenum, iron or sulfur to diets that are already deficient in copper is of particular concern because these minerals will further exacerbate copper deficiency. It is recommended that the level of copper be at least twice as high as the molybdenum content. Furthermore, in areas with high soil molybdenum, copper levels five times higher than normal may be required to overcome copper deficiency. In contrast, toxic levels of sulfur and molybdenum in the diet can be counteracted by the addition of copper.

Organic vs. inorganic mineral sources

The source of minerals in the diet can effect the performance of the animals and the cost-effectiveness of the supplementation program. The relative bioavailability of the mineral and the amount of the mineral in the supplement are important factors to consider when purchasing a mineral supplement. Organic mineral sources are characterized by the presence of an amino acid or a carbohydrate carrier for the trace mineral that is to be fed to cattle. In a process informally termed chelation or proteination, the organic carrier molecule is chemically bound to the trace mineral of interest. Inorganic sources of minerals are much more commonly encountered in the North American feed industry. They are mined or chemically synthesized from natural mineral sources and are not bonded to a carrier molecule. They are fed as the naturally occurring inorganic mineral complex.

Organic mineral sources reportedly have higher bioavailabilities than do inorganic sources of minerals; however, chelated minerals are usually more expensive than inorganic sources. Careful evaluation of expected benefits to animal performance in relation to added costs is warranted before exercising the option to feed organic mineral sources to beef cattle. Consult an extension professional for assistance in evaluating which mineral supplement would fit best into any particular scenario.

K.C. Olson is a state beef nutrition specialist. Chad Hale is a graduate research assistant in animal sciences.

G2081, revised February 2001

G2081 Mineral Supplements for Beef Cattle | University of Missouri Extension

Order publications online at http://extension.missouri.edu/explore/shop/ or call toll-free 800-292-0969.

University of Missouri Extension - print indicia