Aquifers and Soil Filter Effect
Department of Agronomy
Groundwater is like a very large, saturated underground sponge made of sands
and gravels. Water seeps through this sponge at varying rates, depending on
the permeability of the sands or gravel (Figure 1). Water filters down through
the soil until it reaches the aquifer.
Correct and incorrect views of groundwater.
Aquifers may be present very near the ground surface or more than 1,000 feet down. Factors that affect the potential for contamination of groundwater include: the depth to the water, soil type and geology of the land, together with how rapidly waters from the surface can reach the groundwater.
Chemicals in soils may eventually show up in groundwater at some place or time (Figure 2). However, not all materials end up in groundwater and not all the materials that do get into it are in hazardous forms.
Soil filter effect.
Groundwater contamination only becomes a problem when chemicals:
- Are present in large enough quantities,
- Dissolve in water, and
- Leach far enough through soil to reach the groundwater.
How far chemicals leach depends on the type of material and the soil type. Soils such as clay can attract and hold large amounts of chemicals. Chemical materials can be changed through soil microbial and chemical reactions, reducing or eliminating their toxicity. As soils become more porous, like sands, chemicals flow more directly through these soils and may enter a shallow water table.
This publication was written by Karen DeFelice, former associate extension
agronomist; Nyle Wollenhaupt, former state extension agronomist; and Daryl Buchholz,
state extension agronomist. This material is based upon work supported by the
United States Department of Agriculture, Extension Service, under special project
WQ24, reviewed October 1993